Sigma Marble and Granite, Inc.

Porcelain, Ceramic, Mosaic and Quarry Tile

CARE AND MAINTENANCE INSTRUCTIONS

Porcelain and quarry tile are very durable materials that require minimal maintenance and are               designed to last a long time. The following instructions are general and are meant to help understand the nature of this product in order to maintain it properly. Please do not hesitate to contact us at (214) 637-5200 if you have any questions or concerns.

NOTE: ALWAYS TEST A SMALL INCONSPICUOUS AREA WITH THE CHEMICALS AND DETERGENTS THAT YOU INTEND TO USE ON THE FLOORS AND/OR WALLS, TO MAKE SURE THEY DO NOT HARM THE FINISH.         

            INTRODUCTION                            

The most vulnerable part of a porcelain or quarry tile job is the grout. Dirt and debris under foot traffic will scratch the tile surface and discolor grout joints. Polished porcelain tile will show traffic patterns faster than unpolished tile.

PREVENTIVE

With all this in mind, the basic items to remember when caring for a tile floor and/or walls is:

1.      Keep the floor and/or walls clean. That will definitely reduce the wear and tear on it.

2.      Wipe off spills immediately, so the damage to the grout is minimized.

DO’s

·        Clean frequently with a CLEAN MOP/ CLEAN SOFT RAG and CLEAN WATER and detergent if necessary, especially in high traffic areas.              

·        Use mats at entryways to reduce the amount of dirt tracked in.

·        Clean spills immediately.

·        Seek the help of a professional to restore your grout to its original look or to clean your floor and/or walls using harsh chemicals.

DON’Ts

·        Do not use a DIRTY MOP/ DIRTY SOFT RAG. It will stain your grout.

·        Do not roll heavy loads directly on your floor. The corners of the tile may break off. Use plywood or any other material to distribute the weight.